Kwakadaz
Registered User
Hi all, i am a newbe to this site and new to Harley Davidson
I have picked up a 2003 fat boy that is a none runner with no spark
CPS is fine about 3.5 volts AC when cranking
New Ignition coil still no spark. Put the meter on the A terminal at the coil and no volts but with the key on and put the run switch to run position you can hear the relay click and then 12 volts at terminal A, then with in two seconds there is another click and the volts drop to 0, fitted new System relay and Crank relay ( but the engine turned over ok any way )
and ideas would be truly grateful.
I have picked up a 2003 fat boy that is a none runner with no spark
CPS is fine about 3.5 volts AC when cranking
New Ignition coil still no spark. Put the meter on the A terminal at the coil and no volts but with the key on and put the run switch to run position you can hear the relay click and then 12 volts at terminal A, then with in two seconds there is another click and the volts drop to 0, fitted new System relay and Crank relay ( but the engine turned over ok any way )
and ideas would be truly grateful.