117 inch Dyna, T-Man cams, head work, Power Vision tune

[Fast Lane]

It doesn't get any better than this. 2007 Dyna, SE 117 kit, T-Man 662-2 cams, Fast Lane heads. 140 ft/lbs of torque and 148 horsepower ...
One very happy customer!

 

[Dazzlin]

Re: 117 inch Dyna, T-Man cams, head work, Power Vision tune

That?s impressive.

Out of interest, what other mods were required to achieve that level of performance and keep reliability with the higher revs....clutch, oil pump, cam plate etc...?

 

[Fast Lane]

Re: 117 inch Dyna, T-Man cams, head work, Power Vision tune

It has a trued and welded crank and a Feuling cam plate and pump which in my opinion is preferable but not necessary when running gear driven cams, and an open belt primary/clutch I think manufactured by BDL. The cams are 0.660" lift which require roller rockers and also geometry correction which was part of the head work. Otherwise just a bolt on 117 kit, 58mm TB and bigger injectors ... all off the shelf parts.