howo
Club Member
Going to be fitting rocker lockers in my 2005 XL1200R this winter & while the rockers are off the heads I am thinking of re locating the crank case breathers from the heads to the cam chest ie the Deimus mod
sportsterpedia.com
So I have a question for anyone whose researched this and or done this mod.
The only PCV valve I can find is this
www.hogparts.co.uk
Motorcycle Storehouse item
Is it any good?
The mod recommendation is a much more expensive but I assume a much better valve
“Krankvent ETSE valve” which I can’t find anywhere
Anyone know where I can find this?
Also anyone whose done the mod I would appreciate your comments
Cheers
REF: Engine Mechanicals - Sub-05D - Sportsterpedia
So I have a question for anyone whose researched this and or done this mod.
The only PCV valve I can find is this
Pcv Crankcase Breather Cannister
DescriptionPCV crankcase breather cannisterDetailsChrome. Positive Crankcase Ventilation, a universal chrome plated steel crank vent system for use on all H-D models. Fits regular 3/8" oil lines. The engine can breath out, but not breath in, thus maintaining vacuum in the crankcase at all RPM...
www.hogparts.co.uk
Is it any good?
The mod recommendation is a much more expensive but I assume a much better valve
“Krankvent ETSE valve” which I can’t find anywhere
Anyone know where I can find this?
Also anyone whose done the mod I would appreciate your comments
Cheers
Last edited: