Simple but effective 96" build ..

[Fast Lane]

This is a straight forward build that turned out well. A 96" Dyna with just a cam change, my Street Port heads and a Power Vision dyno tune. Only 9.6:1/ 190 psi cranking pressure so it's an easy starter with no compression releases needed. Stock valves with appropriate port work and a good tune. Just under 100 ft/lbs of torque at 2000 RPM - job done!

 

[Army]

Cracking figures again Alex

 

[El Hombre]

Must be a happy owner. I know I would be.

 

[Mark Hammond]

Alex, I’d like to have a chat about having you do some work on my 96” in the autumn.