C
Cybertec?
Guest
....just read about this but can't find out exactly what it is or does.....anybody?
BaZa®
Deceased Member
Y
yamyambuelly
Guest
Re: 'White wire mod'?
ive heard that it works on the pre 2006 models. i put a jardine silencer and a racing ecu on mine and i lost a lot of the midrange torgue but once it gets past 4000 rpm it goes like hot shit off a shovel
ive heard that it works on the pre 2006 models. i put a jardine silencer and a racing ecu on mine and i lost a lot of the midrange torgue but once it gets past 4000 rpm it goes like hot shit off a shovel
Helmetbolt
Club Member
G
grbrown
Guest
Re: 'White wire mod'?
BaZa,
I just googled and the top item listed was a link back to your very words! I think that is called a loop!!! Doh...
BaZa,
I just googled and the top item listed was a link back to your very words! I think that is called a loop!!! Doh...
K
Kev
Guest
Re: 'White wire mod'?
Ecmspy does indeed have the option to turn on the white wire mod. Cutting no longer required
Ecmspy does indeed have the option to turn on the white wire mod. Cutting no longer required
N
nutah
Guest
Re: 'White wire mod'?
have a look on UKBEG the whole tech bit is explained there .:60277EB7B04744289C0
bassicaly it gets rid of an emision flat spot to get through the emision tests.
you only need to remove the pin from the conector then tape it up , DON'T cut the wire.
the ECM spy can over come this too.
have a look on UKBEG the whole tech bit is explained there .:60277EB7B04744289C0
bassicaly it gets rid of an emision flat spot to get through the emision tests.
you only need to remove the pin from the conector then tape it up , DON'T cut the wire.
the ECM spy can over come this too.
Last edited: