wheel bearings

[hippy]

.

Ive got a 3/4 inch spindle going threw 1 inch wheel bearing on later mag wheels Watch the vid at the end when Mike checks the bearings, its no wonder so many people hhave trouble with their wheel bearings

 

[devon.john]

i think Pacific Mike is one of the best Harley mechanics to follow on Utube ,,
his way of explaining and showing is brilliant ,,,

 

[softail898]

i think Pacific Mike is one of the best Harley mechanics to follow on Utube ,,
his way of explaining and showing is brilliant ,,,

Yep, I agree. Old School. Never hurried and always takes time to explain. Great to watch.

 

[hippy]

My mate steve who i bought my roadking off fitted later wheels he worked at Rolls always takes te seal off bearing before cleaning te grease out and replacing with marine Grease , then replacing the bearing seal , always making sure to it the bearing with the seal side he tool off facing the inside of the wheel hub just incase the seals not as tight

 

[Ron]

I always use waterproof wheel bearing grease from a boat shop. These people back a trailer into the sea and then tear of up the motorway with a big old boat on the back. That should cope with a bit of rain.

 

[hippy]

I always use waterproof wheel bearing grease from a boat shop. These people back a trailer into the sea and then tear of up the motorway with a big old boat on the back. That should cope with a bit of rain.

We used it on mini diggers etc so muc better li9ke my mate said to me any issue hes had with non taper roller bearings the bearings Have been rustly ie water has got in

 

[spakey]

My 2007 Faty had 25mm rear spindle so best to measure accurately (1" = 25.4mm)

 

[watchman]

I never use reducers i prefer to get correct size bearing from a factor plus change spacer to suit