Mark Hammond
Committee
There are a number of potential options on the Pan America for providing a 12v power supply to accessories such as mobile phones, sat nav’s etc which include, taking power directly from the bikes battery, utilising the usb c data transfer port on the side of the bike’s TFT display unit or utilising the heated clothing power supply ports that are provided under the bikes seat.
It is possible to use the usb c port on the side of the bikes TFT display to power a 12v accessory, however that port is not waterproof, so shouldn’t be used when its raining and usb c ports are known to wear out quickly if used repeatedly. The issue of possible wear on the bikes usb c port is a potentially serious one because it is this port that a dealership uses to perform diagnostic checks on the bike and a worn usb port could lead to a situation where its not possible for the dealership to perform diagnostic checks and software updates. Should you be unlucky enough to have the usb c port fail, at todays prices, the usb c port is currently listed at £75 plus vat, just for the actual usb connector. the cap is £24.95 plus vat so don’t lose it
The bikes Bluetooth connectivity has been at best, patchy on my bike and the sat nav provided via the HD App on a phone which is in turn connected to the dash display via the somewhat unreliable Bluetooth connection, is a very simple sat nav system that is a bit clunky to use.
My chosen solution to having my mobile phone always charged, available to use as a reliable sat nav via any one of a number of navigation apps and available to use as a phone/media player via my headset is to use a Quadlock wireless charging head and anti vibration damper mount, powered via the Quadlock smart power supply which can be switched to only provide power when the battery is receiving more than 12.5 volts, or it can be switched to provide a constant supply. The Quadlock smart switch is powered from one of the switched live heated clothing plugs under the seat to ensure that the phone isn’t being charged while the ignition isn’t on, to prevent battery drain on an already underpowered battery.
The Quadlock smart switch comes with wiring to connect direct to the bike’s battery so a suitable connector to fit the heated clothing ports needs to be sourced and wired onto the Quadlock wiring loom. These are the connectors that I used for connecting to the bikes heated wiring ports. https://www.amazon.co.uk/sourcing-m...qid=1694511199&sprefix=Dc+5.5,aps,102&sr=8-12
I have used the second heated clothing port as a switched live power feed for my TomTom sat nav which I already had and which has proven to be reliable over the last 3 or 4 years as a means of planning and following specific routes with waypoints and specific stop off points for regional ride outs. It also takes away the reliance on the phone as a navigation tool, which means on multi day trips away from a 240v charging source, I’m not trying to charge the phone on the bike whilst also using a power hungry navigation app. (In practice I’ve found that while using a navigation app, the Quadlock wireless charger will provide sufficient power to gradually charge the phone, but its a slow process due to the amount of power that the phone uses while running a nav app)
Taking power from the bikes sae battery charging point doesn’t work because the sae lead is wired to switch off whenever the ignition switch is in the switched on position and doesn’t provide any power output.
As usual, this post is being placed here to provide this information for owners or potential owners of Rev Max engined bikes. All bikes have potential problem areas and hopefully a little bit of knowledge shared, will help make the ownership of these bikes enjoyable and trouble free.
No need to comment on this post if you simply don’t like the Rev Max engined, or other modern Harleys. Lets keep this section of the forum a place for sharing information and asking questions about these bikes.
It is possible to use the usb c port on the side of the bikes TFT display to power a 12v accessory, however that port is not waterproof, so shouldn’t be used when its raining and usb c ports are known to wear out quickly if used repeatedly. The issue of possible wear on the bikes usb c port is a potentially serious one because it is this port that a dealership uses to perform diagnostic checks on the bike and a worn usb port could lead to a situation where its not possible for the dealership to perform diagnostic checks and software updates. Should you be unlucky enough to have the usb c port fail, at todays prices, the usb c port is currently listed at £75 plus vat, just for the actual usb connector. the cap is £24.95 plus vat so don’t lose it
The bikes Bluetooth connectivity has been at best, patchy on my bike and the sat nav provided via the HD App on a phone which is in turn connected to the dash display via the somewhat unreliable Bluetooth connection, is a very simple sat nav system that is a bit clunky to use.
My chosen solution to having my mobile phone always charged, available to use as a reliable sat nav via any one of a number of navigation apps and available to use as a phone/media player via my headset is to use a Quadlock wireless charging head and anti vibration damper mount, powered via the Quadlock smart power supply which can be switched to only provide power when the battery is receiving more than 12.5 volts, or it can be switched to provide a constant supply. The Quadlock smart switch is powered from one of the switched live heated clothing plugs under the seat to ensure that the phone isn’t being charged while the ignition isn’t on, to prevent battery drain on an already underpowered battery.
The Quadlock smart switch comes with wiring to connect direct to the bike’s battery so a suitable connector to fit the heated clothing ports needs to be sourced and wired onto the Quadlock wiring loom. These are the connectors that I used for connecting to the bikes heated wiring ports. https://www.amazon.co.uk/sourcing-m...qid=1694511199&sprefix=Dc+5.5,aps,102&sr=8-12
I have used the second heated clothing port as a switched live power feed for my TomTom sat nav which I already had and which has proven to be reliable over the last 3 or 4 years as a means of planning and following specific routes with waypoints and specific stop off points for regional ride outs. It also takes away the reliance on the phone as a navigation tool, which means on multi day trips away from a 240v charging source, I’m not trying to charge the phone on the bike whilst also using a power hungry navigation app. (In practice I’ve found that while using a navigation app, the Quadlock wireless charger will provide sufficient power to gradually charge the phone, but its a slow process due to the amount of power that the phone uses while running a nav app)
Taking power from the bikes sae battery charging point doesn’t work because the sae lead is wired to switch off whenever the ignition switch is in the switched on position and doesn’t provide any power output.
As usual, this post is being placed here to provide this information for owners or potential owners of Rev Max engined bikes. All bikes have potential problem areas and hopefully a little bit of knowledge shared, will help make the ownership of these bikes enjoyable and trouble free.
No need to comment on this post if you simply don’t like the Rev Max engined, or other modern Harleys. Lets keep this section of the forum a place for sharing information and asking questions about these bikes.
Last edited: